Branches of mechanical engineering: Differences Betwixt Fd Fan As Well As Id Fan

FD Fan
ID Fan
Forced draft fan
Induced draft fan
used basically for providing the required quantity of hot air to the furnace for shine in addition to uniform combustion of fuel
Located betwixt dust collector in addition to chimney
FD fan volition furnish required air for the combustion of the fuel inward the furnace
ID fan volition conduct keep the hot flue gases from furnace and volition deliver to chimney.
FD fan volition attain the positive describe per unit of measurement area within the organisation i.e. furnace
ID fan volition attain the negative describe per unit of measurement area inward the furnace to take the flue gases
Handle mutual depression temperature air

Handle hot gas, thence to a greater extent than ability is required

Less maintenance , eat less ability every bit density of mutual depression temperature air is less.

Cope alongside corrosive combustion products in addition to wing ash

Is much smaller than ID fan.
 Size is largest every bit it exhaust all air (secondary air in addition to primary air) in addition to is laid about to laid about every bit is necessary for prophylactic boiler performance to preclude pressurization of boiler.

Sumber http://mechanicalgalaxy.blogspot.com/

Jangan sampai ketinggalan postingan-postingan terbaik dari Branches of mechanical engineering: Differences Betwixt Fd Fan As Well As Id Fan. Berlangganan melalui email sekarang juga:

Bali Attractions

BACA JUGA LAINNYA:

Bali Attractions